Cervellati Micro Cell Recoil Pad - 15mm Black
Cervellati Micro Cell Recoil Pad - 15mm Black
The Cervellati Micro Cell recoil pads are trusted worldwide for their excellent recoil absorption properties and premium quality finish, combined with longevity. This pad will add 15mm to the overall length of your gun when fitted.
Stock Alert
Please alert me via email when this product is back in stock.
Length: 147mm
Width: 48mm at the widest point
Hole Distance: 92mm
Established in 1937, Cervellati specialises in producing quality rubber products and invests in both technology and research and design to meet the demands of the shooting market. Known for their flexibility, Cervellati's Micro pads are produced in an expanded technopolymer, offering the advantage of being flexible, up to 60% lighter than rubber or gel and absorbing a higher rate of recoil, while providing minimal deformation during the shot or "bottom out" effect over time.
Fitting Instructions:
1) For perfect adherence, flatten the stock’s back and wrap the stock to protect it during the process.
2) Lubricate the screws, then plug them in the original holes on the stock.
3) To grind the toe end of microcell pad, it is necessary to use a high speed machine. We recommend to employ a 400 grit sanding belt for finish. Best results can be achieved by the use of a new and lubricated belt.
4) Finally, during the grinding, the stock should be gently drawn close to the belt. This will avoid overheating and damaging the recoil pad.
Note: Cervellati pads are not supplied with screws.
Delivery and Returns
Delivery
Returns
Length: 147mm
Width: 48mm at the widest point
Hole Distance: 92mm
Established in 1937, Cervellati specialises in producing quality rubber products and invests in both technology and research and design to meet the demands of the shooting market. Known for their flexibility, Cervellati's Micro pads are produced in an expanded technopolymer, offering the advantage of being flexible, up to 60% lighter than rubber or gel and absorbing a higher rate of recoil, while providing minimal deformation during the shot or "bottom out" effect over time.
Fitting Instructions:
1) For perfect adherence, flatten the stock’s back and wrap the stock to protect it during the process.
2) Lubricate the screws, then plug them in the original holes on the stock.
3) To grind the toe end of microcell pad, it is necessary to use a high speed machine. We recommend to employ a 400 grit sanding belt for finish. Best results can be achieved by the use of a new and lubricated belt.
4) Finally, during the grinding, the stock should be gently drawn close to the belt. This will avoid overheating and damaging the recoil pad.
Note: Cervellati pads are not supplied with screws.
Delivery
Returns